This guide will help you how to create virtual BluFI setup in Bluzone and provision BluFl to your project .
...
Once the BluFI are provision to your project then use "Virtual Device" tab in Bluzone console to create virtual devices.
1. General Setup
The following method you can use to create virtual BluFI in Bluzone.
...
Repeat the above step2 until all BluFI have the location.
...
3. Provision Virtual BluFI with Installer App
Download the following HID IoT Installer App from the Apple Store:
https://apps.apple.com/gb/app/hid-iot-installer/id1524806871
...
NOTE :
You may be required to trust the app on your iOS device. If prompted for this issue, follow the instruction as in the below link
...
Step 3 : Wait for “Connected” status to appear on the screen as shown below .
...
4. Provision Virtual BluFI with Bluzone Mobile App
Download the Bluzone mobile app from IOS App Store or Google Play .
The bluzone provisioning app detail are available in below link.
Step 1 : Launch the Bluzone app on your device.
...
Step 10 : BluFI associated to the project.
4. BluFI Functionality & Geofence Policy Testing
4.1 Geofence Policy Testing
...
Step 3 : Choose Blufi Functionality Test first from the Test Type dropdown, then choose the beacon that you will be using for testing by choosing Test Beacon. Adjust the default Min Detectable RSSI value, if appropriate. Follow the onscreen instructions to complete the test. Repeat testing steps for each Blufi to be tested.
...
5. Beacon Provisioning
Step 1 : From the project screen, choose the + sign in the top right corner of the screen, then choose Provision a Beacon.
...
Step 6 : Wait for message “Device provisioned Successfully “ .
6. Deployment and Network Troubleshooting
If you are experiencing a issue with provisioning or BluFI connectivity with Bluzone cloud then refer the below section.
Network Troubleshooting: Network requirement details for BluFI and for troubleshooting BluFI connectivity to Bluzone cloud.
5. Additional Product Information
Product Specifications sheet
...