To view the current position of a device select the Tracking view from the navigation bar on the right.
...
Press the Show all data button.
Use the tags field to search for devices with a tag or use the search field to search by device name or ID
Select the device from the list on the left to view its current location.
Note for Asset+:
the dot is blue when the device has sent an uplink with valid GNSS coordinates or if the position is derived via Bluzone RTLS using BluFIs.
the dot turns grey either when Bluzone receives the Port 2 uplink indicating the device is moving or if the Asset+ sends position uplink with satellites =0, this could occurs if the device is indoors or if the device fails to acquire a position, in this situation bluzone will show the previous known position.
Examples: Valid GNSS position.
...
Bluzone has received valid GNSS coordinates, the dot turns blue and the variance indicates the HDOP
Examples: Port 3 uplink with Satellites =0, the device failed the indoor check.
...
The dot turns grey, the position is not updated, a time stamp shows the time the device reported the uplink with Sats =0
Examples: Port 2 uplink the device is moving and hence no longer in its previous position.
...
The dot turns grey, the position is not updated, a time stamp shows the time the device reported the Motion start uplink.
Examples: Position cellulated by Bluzone RTLS using nearest BluFI.
...
The device is position is being calculated using Bluzone, the dot is blue.