Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 38 Current »


 

Introduction 

This is a quick-start guide to getting your Blufi and Beacon devices connected to the Bluzone Cloud.

For in-depth information please refer to the Bluzone Cloud User Guide.

Setup an Account 

Register for a Bluzone Portal account at Console

Registration gives you access to the Bluzone Portal and API keys for  use with REST APIs.

You can setup and configure the following in the Bluzone Portal:

  • One or more Projects 
  • For each Project
    • Wifi Settings for one or more Blufis
    • Templates for configuring Beacons by Beacon Type

For each project a set of API keys are also generated which can be used for accessing raw Blufi scan data (BLE data) programmatically.

Setup Wifi profiles

Before provisioning either a Blufi or Beacon device you will need to configure your Wifi Profiles that Blufi devices will be configured with.

To configure one or more Wifi profiles login to the Bluzone Portal, select Wifi Profiles and enter details for the wireless network.

Wifi Network Settings

Wi-Fi can work over one of two spectrum bands: 2.4GHz or 5GHz. Before proceeding with configuration please ensure your Wifi configuration uses a 2.4GHz SSID.

  • The BluFi device is compatible with 2.4GHz bands only.
  • The BluFi device is compatible with dual band networks but the BluFi must connect to the 2.4Ghz band SSID.

Please also ensure that the Wifi network firewall settings don't restrict Blufi connectivity.

 

 

Install the Bluzone Provisioning App

The Bluzone Mobile App can be used for the following:

  • Secure Blufi Registration and Provisioning
  • Secure Beacon Registration and Provisioning

You may download the latest Bluzone Provisioning App using the links below:

  • Android: 
    • Unable to render {include} The included page could not be found.

 

Provision your BluFi device

The following video provides a quick introduction to the device BluFi registration and provisioning process:

Unable to render {include} The included page could not be found.

To register and provision your BluFi:

  • Open the Bluzone Provisioning App
  • Enter user credentials used to setup the bluzone account 
  • This will take you to the overview of your current project 
    • If you have multiple projects in your account to change project:
      • Select Menu
      • Select settings
      • Select Change Project

      • Select desired project

        Blufi Scanning

        Please note that you have to be very close to the BluFi for your iOS or Android device can make a successful connection. 

  • Select Provision

  • Select BluFi

  • Ensure iOS device is set up against Blufi 

  • Select BluFi with circle to left filled with most green (strongest signal)

  • Select the desired WiFi Access Template
  • Select i on bottom right
  • Select the desired location
  • Select done

  • Take Device Selfie (optional, can select Skip on upper right hand corner)

  • Enter other optional information like Tags and Photos.
  • Select "Provision" to start the provisioning process
  • After provisioning process is completed, the BluFi will connect to the Bluzone cloud and start sending BLE scan data.
    • To verify,  login to the Bluzone Portal and select the provisioned BluFi. 
    • The BluFi status will show "Connected"
    • Select beacon and select "Activity Log" to view BLE data.

Provision your Beacon device

The following video provides a quick introduction to the device Beacon registration and provisioning process:

Beacon Provisioning

To register and provision your Beacon:

  • Open the Bluzone Provisioning App
  • Enter user credentials used to setup the bluzone account
  • This will take you to the overview of your current project 
    • If you have multiple projects in your account to change project:
      • Select Menu
      • Select settings
      • Select Change Project

      • Select desired project

  • Select Provision

  • Select Beacon

  • Ensure iOS device is set up against Beacon

  • Select Beacon with circle to left filled with most green (strongest signal)

  • Select the desired Template
  • Select i on bottom right
  • Select the desired location
  • Select done

  • Take Device Selfie (optional, can select Skip on upper right hand corner)

  • Enter other optional information like Tags and Photos.
  • Select "Provision" to start the provisioning process
  • After provisioning process is completed, the BluFi will connect to the Bluzone cloud and start sending BLE scan data.
    • To verify,  login to the Bluzone Portal and select the provisioned Beacon. 
    • The Beacon status will show "Active"
    • Select beacon and select "Activity Log" to view activity on BluFi Scan Map BluFi Scan Map

Accessing BluFi scan data using the Bluzone Consumer Service

 

Unable to render {include} The included page could not be found.

  • No labels