...
Setup Instructions:
LoRa Gateway Setup:
The Gateway is supplied preconfigured, all that is required is to provide power and a internet connection. The gateway is configured to act as a DHCP client.
It is recommended to mount the gateway either on a tower or above the roof of the tallest building using the provided pole mount brackets, such that the gateway has line of site with the majority of the site. For initial testing or test where limited range is acceptable the gateway can be temporarily powered indoors or at ground level using a temporary setup. Gateway quick start and setup instructions can be found here.
Note the gateway internal antennas are directional, for omnidirectional antenna it is recommended to use 6dBi eternal antennas which is not supplied with the kit. for further detail please review the Gateway Quick start page and recommended external antennas
BluFi UP00 Setup
Setup and configuration of Asset+
...