Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 2 Next »

The evaluation kit is an advanced solution designed for industrial-grade real-time location system (RTLS) applications in challenging environments. Combining ultra-rugged construction with cutting-edge LoRaWAN GNSS & Bluetooth® Low Energy technologies, this evaluation kit provides a comprehensive platform for testing and deploying robust location tracking solutions both indoors and outdoors over wide areas. The BEEKs Asset+ is a ruggedized industrial tracker that utilizes GNSS with LoRaWAN for wide area outdoor asset tracking and Bluetooth Low energy for indoor real-time location, it is equipped with ultra-bright LEDs and a buzzer to facilitate asset identification for location and picking applications, this evaluation kit enhances asset identification and tracking efficiency in challenging settings.

Sense Asset+ comes in two versions: The standard version allows fixation via cable ties or rivets to a multitude of assets. The Hanger version is designed for quick attachment and removal to a vehicle’s rear-view mirror, large cables etc.

image-20250128-190526.png

Kit Content:

  • 5x Sense Asset+

    • 2.5mm Hex key for Asset+ case screws

  • 2x BluFI UP00 EXT (PoE BluFI), Part number: BVBFPOEUP-EXT

    • 4x External SMA antennas, Part number: BVACC-ANT-SMAM-2.4/5 GHz

    • 2x AC to DC power supply for BluFI, Part number: BVACC-DCPSU12V

    • 2x DC power adaptor, Part number: CBL:00340

    • 2x Ethernet cable

  • 1x LoRa Gateway

    • Power supply for LoRa Gateway

    • 2x Ethernet cables

  • HID Omnikey 5022CL NFC reader

Setup Instructions:

  1. LoRa Gateway Setup:

    • The Gateway is supplied preconfigured, all that is required is to provide power and a internet connection. The gateway is configured to act as a DHCP client.

    • It is recommended to mount the gateway either on a tower or above the roof of the tallest building using the provided pole mount brackets, such that the gateway has line of site with the majority of the site. For initial testing or test where limited range is acceptable the gateway can be temporarily powered indoors or at ground level using a temporary setup. Gateway quick start and setup instructions can be found here.

    • Note the gateway internal antennas are directional, for omnidirectional antenna it is recommended to use 6dBi eternal antennas which is not supplied with the kit. for further detail please review the Gateway Quick start page and recommended external antennas

  2. BluFi UP00 Setup

  3. Setup and configuration of Asset+

  • No labels