08.b How-to Manage BluFis

Owned by Omry Muszkal (Unlicensed)
Last updated: Oct 08, 2015 by Armando Gonzalez (Unlicensed)
1 min read

This will guide you through managing your BluFis after you have Provisioned them

Step-by-step guide

Once you have setup BluFis you can start managing them

  1. Click on the BluFi tab on the left hand side of the portal
    1. You can change the view by click the buttons on the right side of the window
  2. You will be able to see General information about each BluFi

Square View:

In this view you can see general information about the BluFis such as:

    1. Name
    2. Statue
    3. Wifi name
    4. SID-64
    5. IP address
    6. Last Sync

Table View:

In this view you can see general information about the BluFis such as:

    1. Name
    2. ID-64
    3. Wifi name
    4. IP address
    5. Tags
    6. Status

Single BluFi:

From any view, click a BluFi you would like to see more information about and you will see these tabs:

  1. General
    1. Change name
    2. Modify Tags
    3. See various BluFi configuration information such as:
      1. SID-64
      2. Last Sync
      3. Main Firmware Version
      4. BLE Firmware Version
    4. See various network settings information such as:
      1. Wi-Fi Status
      2. SSID
      3. Security Type
      4. IP Address
      5. WiFi Mac
      6. BLE Mac
  2. Activity
    1. Live log on the BluFi. you can see all of the packets that the BluFi is picking
  3. Location
    1. Change the location of the BluFi
    2. Change position on the map
  4. Selfie
    1. See the photo that was taken while BluFi was provisioned
  5. Violations
    **Note this tab opens up once the BluFi has active violations
    1. See active Violations on the BluFi

Don't forget to save your changes!